克利夫兰开口杯

自动开口闪点试验仪

ACO-T602

Simplest & Easiest Operation

Model ACO-T602 automatically carries out Cleveland Open Cup (COC) flash point test of up to 6 samples continuously. For large sample numbers, this carrousel model reduces the burden on the laboratory personnel.

ACO-T602自动开口闪点试验仪为台式六联结构，能严格按照克利夫兰开口杯法（COC）测试石油产品的开口闪点。尤其适用于大量的和要求连续测试的场合，能有效的提高试验室的工作效率。

HIGHER LAB PRODUCTIVITY: The programmable 6-position carrousel improves COC test throughput drastically. 仪器在一个旋转托盘上设置了六个油杯，自动旋转切换，依次测试。

EASY PROGRAMMING: Up to 12 types of sample data can be stored and later recalled for quick and easy programming.  可独立设置样品的测试模式，预期闪点。在试验过程中，不需要中断整个试验过程，就可以人为更换测试/未测试样品，设定新的试验参数，最多可储存12组独立测试模式和数据。

ELECTRIC IGNITION: Reliable and easy-to-handle electric Ignitor is employed. Two pieces of coiled heater are placed near the sample cup rim. The ignitor has an extended period of life. 仪器使用电弧点火引燃样品的燃烧，闪点检测效果很好，点火头使用寿命也很长。

INNOVATIVE FLASH DETECTOR*: Ionization between the sample cup rim and either of the two electric igniters is detected as a flash occurs. The proven ionization method ensures highly reliable flash detection. Since the electric heater cleans by itself, the need for messy cleaning of ionization detector is minimized. *: Patent No. 2610000 (’94 Japan) and No.5834630 (’98 USA)

独有的电弧点火和闪点检测传感器一体式设计，检测灵敏度高，检测结果准确，维护简单，清洗方便，已经获得了日本和美国的专利保护。

QUICK COOLING AFTER TEST: High velocity air cooling minimizes the waiting time between tests. The next test cycle is proceeded upon reaching a predetermined cooling time. 当一个样品测试完成后，自动控制系统会对油杯进行强力风冷，能迅速降低油品和油杯到室温，便于2次重复测试。

AUTO FIRE CONTAINMENT: ACO-T602 is equipped with a fire containment lid which activates automatically to help putting out fire when ACO-T602 detects specimen is burning up heavily. （相比较于ACO-T601，）ACO-T602配备有自动灭火盖，简单实用，可在测试样品的燃点后自动灭火。作为仪器安全措施的一部分，自动灭火系统也有效的避免了测试中引起火灾的意外情况。

DATA HANDLING: The unit is equipped to store up to 50 successive test results and export to the printer or to a LIMS through an RS232 port. 仪器可记录最后50 次的试验数据，内置电池，即使关机数据也不会丢失。还可以通过RS-232外接打印机输出，或同实验室信息管理系统（LIMS）通讯，便于集中控制管理。

TANAKA Automatic Cleveland Open Cup Flash Point Tester, model ACO-T602

SPECIFICATIONS:

RELATED STANDARDS: （适用标准）

ISO 2592, ASTM D92, IP 36, GB/T 3536 etc.

MEASURING RANGE: （测试范围）

Ambient to 400 ℃ （ 室温 - 400℃）

TEST MODE: （测试模式）

ASTM D92 Flash,  闪点

Flash + Fire Fire point must be visually monitored 闪点+燃点检测。燃点检测有一定的危险性，必须有人员在场的情况下，才能进行。

DISPLAY: （显示）

Fluorescent display tube (VFD module) VFD荧光显示屏

PRINTER: （打印）

Thermal type printer (provided) （标准附件）外接热敏打印机

TEMPERATUR SENSOR: （温度传感器）

PT-100 in stainless steel sheath （不锈钢护套PT-100传感器）

FLASH DETECTION: 闪点检测

Ionization between test cup and igniters (Patented)火焰离子检测（专利技术）

HEATER: 加热功率

Nichrome Coil heater: 1kW@100V or 1.2kW@220V 镍铬合金加热盘组件

IGNITION SOURCE: （点火）测试方式

Dual Electric Igniters (platinum coil)  双铂金电极（环），电子点火

COOLING DEVICE:

Forced air cooling by sirocco fan （试验结束）强制风冷

BAROMETRIC CORRECTION: 气压补正

By entering the barometric pressure reading through the control panel or fully automatic correction with an optional barometric pressure sensor可在仪器的设置面板中设定大气压力数值，仪器自动计算并补正最终的试验结果。或加装气压检测传感器（选购件），仪器自动采集大气压力数值并计算补正试验结果。

DATA OUTPUT: 数据输出

RS-232C  1 channel  RS-232C 接口，1

SAFETY MECHANISM: （安全保护）

Fire containment lid which activates automatically to help putting out fire when ACO-T602 detects a specimen is burning up heavily. If flash is not detected until the temperature reaches EFP+30 ℃ or 400 ℃, the test is terminated and cooling starts. Automatically shuts off and the problem is reported by buzzer and display, in case:

ACO-T602配备有自动灭火盖，简单实用，可在测试样品的燃点后自动灭火。作为仪器安全措施的一部分，超过预期闪点值30 ℃未检测出闪点，或超过了检测范围（400 ℃）时，仪器自动关机，报警提示，并显示相关出错信息。燃点测试模式或意外火警时，自动灭火盖能在第一时间灭火动作：也有效的避免了测试中引起火灾的意外情况。

(a) Temperature sensor is found defective, 温度检测传感器出错时

(b) Flash detector is found defective, 闪点检测传感器出错时

(c) Thermofuse is blown (Also fire containment lid activates),

   温度保险丝熔断或执行灭火动作时

(d) Built-in battery is found drained out,  内置电池失效时

(e) Upper arm switch is found defective, 测试臂不能上升

(f) Lower arm switch is found defective, 测试臂不能下降

(g) Shutter open/close switch is found defective, or

(h) Control computer runs away (no display) 微处理器失效（无显示）

DIMENSION & WEIGHT: （体积/重量）

控制部，Control unit: 230W x 455D x 110H (mm), 6kg

测试部，Test unit: 405W x 515D x 400H (mm), 33kg

打印机，Printer: 134W x 180D x 58H (mm), 0.6kg

INSTALLATION SITE: 环境要求

Ambient temperature: 0 to 40 ℃     环境温度 0 - 40 ℃

RH: Less than 90%(no condensation)  环境湿度 < 90% （无凝结）

POWER SUPPLY: 电源要求，订购前说明

Single Phase AC100/120V or 220/240V 50/60Hz,  (set at the factory)  1.7kW(max.), 

One line must be grounded. 必须有可靠接地

ORDERING INFORMATION:

STANDARD ACCESSORIES: （标准附件）

OPTIONAL ACCESSORIES: （选购件1）

Barometric Pressure Sensor大气压力检测传感器

Power Connecting Cable, 3m加长电源连接线，3米

Signal Connecting Cable, 3m加长信号连接线，3米

SUGGESTED SPARES FOR 2 YEARS: （选购件2，2年维护）