运动粘度测试恒温槽
KV-6
Optional Six-Channel Quartz Timer
加配多路计时器
The model KV-6 is a Constant Temperature Bath designed for measurement of kinematic viscosity of liquid petroleum products.
KV-6 多路计时器是运动粘度测试恒温槽是配合液体石油产品运动粘度的测试方法（动态粘度所使用的专用恒温浴槽，能够提供正确的测试温度和（最高）±0.01℃高精度恒温环境。
A fluorescent lamp illuminates viscometers brightly for easy observation of meniscus. 仪器本体前侧上方荧光照明，浴槽视场清晰，可清晰观察试样的弯月面。
Seven viscometer holders (for Cannon-Fenske or Ubbelohde viscometers) are included as standard accessories. (Viscometers, bath liquid and liquid-in-glass thermometers must be purchased separately.) 仪器可同时安装7组粘度计进行试验，随机可提供对应的（坎氏/乌氏）粘度计安支架（请看后文的订购说明。运动粘度计，和配套的温度计并不提供，需要另行购买）
WIDE TEMPERATURE RANGE (20℃ to 150℃) AND HIGH ACCURACY TEMPERATURE CONTROL 可提供从(20℃ - 150℃)的温度控制范围和高精度的恒温环境
KV-6 maintains bath liquid temperature accurately as required by ASTM D445.
KV-6运动粘度测试恒温槽可提供严格按照ASTM D445的试验方法要求的温度环境。
Within the range of 20 ℃ to 100 ℃, the temperature is controlled within +/-0.01 ℃; +/-0.03 ℃for outside of this range.
控温精度：20℃-100℃时，+/-0.01 ℃ 超过20℃-100℃范围以外的，+/-0.03 ℃
For 20 ℃ to 30 ℃, connect the built-in cooling pipe to tap water or a recirculating water chiller.
20℃-30℃时，仪器需要配合外接循环制冷源使用。
DIGITAL TEMPERATURE DISPLAY 数字显示
Microprocessor and built-in platinum resistance probe (PT-100) allows one-touch temperature selection and on-screen temperature display.
仪器内置高速微处理器，配合PT-100（铂电阻），数字显示浴槽温度。
温度选择可单键操作，预置定点温度，使用简单，性能可靠。
TANAKA Kinematic Viscosity Bath, model KV-6
SPECIFICATIONS:
CONFORMING STANDARDS: 适用标准
ASTM D445, GB/T 265， ISO 3104, IP71 and JIS K2288
APPLICABLE VISCOMETER:
Cannon-Fenske type, 坎农-芬斯克毛细管粘度计，芬氏粘度计
Cannon-Fenske Reverse flow type (with standard viscometer holder),
芬氏逆流粘度计（可通用标准附件中的粘度计支架）
Ubbelohde type (with optional viscometer holder) 乌氏粘度计（注意：需要定购的粘度计支架）
特别说明：SH/T173-92(2004)《玻璃毛细管粘度计技术条件》，BMN-1，BMN-2型对应使用的是品氏粘度计，需要订购配套的粘度计支架。BMN-3对应的是芬氏粘度计，BMN-4型对应的是芬氏逆流粘度计，可使用标准附件的粘度计支架
BATH:
Stainless Steel with a heat resistant glass, W320 x D230 x H320 mm
Equipped with overflow tube and drain cock Capacity: 23 liters
钢化耐热方桶形玻璃浴槽，W320×D230×H330(mm)
有防溢口和排液阀的设计，容积 23升
TEMPERATURE CONTROL: 温度控制
PID controlled by Microprocessor Precision : ± 0.01℃ @ 20 ℃ to 100 ℃ ± 0.03℃ outside of above range 高速微处理器，PID控温，控温精度：20℃-100℃时，+/-0.01 ℃ 超过20℃-100℃范围以外的，+/-0.03 ℃
Preset temp. : six temperature points: 25, 40, 50, 80, 100 and 135 ℃. Preset temperature can be changed at the factory at any point between 20 to 150 ℃. (optional) Please specify when ordering.
标准型为20、40、50、80、100℃、135℃ 预置6点随意切换（特殊温度点可在20-150℃范围内选定，需在工厂内定制，订购前必须声明）
Temp. Adjust : by pressing switches located at the front panel. 前面板温度选择按键
Temp. Sensor: PT-100 传感器
HEATER: 加热功率
Sheathed Heaters, 700W x 2 pcs 电加热丝，700W x 2
COOLING SYSTEM:
For 20 to 30 ℃, by flowing a cooling medium through the cooling pipe installed at the bottom of bath. (Provision for cooling medium is optional) 推荐：20℃-30℃时，仪器需要配合外接循环制冷源使用。
STIRRER:
Propeller type. Highly efficient heat exchange is established. 内置高效的搅拌循环，均匀控温
ILLUMINATION:
A fluorescent light positioned horizontally in the front-top of the bath.
仪器本体前侧上方水平安置荧光照明，浴槽视场清晰。
RECOMMENDED BATH MEDIUM 推荐水浴介质
20 to 80 ℃: Distilled Water Above 80 ℃: Silicone Oil
20 -80℃: 可使用蒸馏水： 80℃以上:高温透明硅油（加热不变色）
DIMENSIONS AND WEIGHT: （体积/重量）
W400 x D380 x H662 mm, 33kg (56kg with water filled) 注水后约5656
POWER REQUIREMENTS: 电源需求
100 or 120VAC, 15A Max.
220 or 240VAC, 9A Max.
Please specify when ordering. （订购前请事先说明）
ORDERING INFORMATION:
STANDARD ACCESSORIES: （标准附件）
|
1. Viscometer Holder, for Cannon-Fenske type*芬氏粘度计支架 |
7 pcs |
|
2. Lid for Viscometer Holder Openning 浴槽盖 |
7 pcs |
|
3. Temperature Sensor 温度传感器 |
1 pc |
|
4. Silicon Stopper No.0A for Thermometer 硅胶塞，安装温度计用 |
1 pc |
*: It can be replaced with Ubbelohde type upon request. 可改换为同数量的乌氏粘度计支架
Please specify when ordering. （订购前请事先说明）
OPTIONAL ACCESSORIES: （选购件1）
Viscometer Tube Holder for Ubbelohde type乌氏粘度计支架
Viscometer Tube, Cannon-Fenske Routine type 芬氏粘度计（常用，透明）
Viscometer Tube, Cannon-Fenske Opaque type 芬氏粘度计（不透明）
Viscometer Tube, Ubbelohde type乌氏粘度计
Silicone Bath Oil (SRX-310), 20 kg 高温硅油(SRX-310)，20公斤装
Six-Channel Quartz Timer, Model: DSW-6 多路计时器DSW-6（日本田中制）
ASTM标准温度计：
Thermometer ASTM 28C (37.8℃)
Thermometer ASTM 29C (54.4 ℃)
Thermometer ASTM 40C (80.0 ℃)
Thermometer ASTM 44C (20.0 ℃)
Thermometer ASTM 45C (25.0 ℃)
Thermometer ASTM 46C (50.0 ℃)
Thermometer ASTM 47C (60.0 ℃)
Thermometer ASTM 110C (135.0 ℃)
Thermometer ASTM 118C (30.0 ℃)
Thermometer ASTM 120C (40.0 ℃)
Thermometer ASTM 121C (100.0 ℃)
Thermometer ASTM 129C (93.3 ℃)
Thermometer ASTM 132C (150.0 ℃)
SUGGESTED SPARES FOR 2 YEARS: （选购件2，2年维护用）
1. Fluorescent Light 6W 2 pcs 照明荧光灯 6w, 2
2. Glow Lamp 1 pc 指示灯，1
![[TANAKA]KV-6运动粘度恒温槽](bookpic/2009921422031953.jpg)
