CANNON Certified Viscosity Check Oils
ASTM D445, ASTM D5293, ASTM D4684
Certified Viscosity Check Oils
CANNON Certified Viscosity Check Oils verify SAE target viscosities for kinematic viscometers per ASTM D445, cold-cranking simulators per ASTM D5293, and mini-rotary viscometers per ASTM D4684.
Each check oil contains a commercial engine oil with certified values at common blend target values for density in g/cm3 (g/mL) at 15 °C, kinematic viscosity in mm2/s (cSt) at 40 °C and 100 °C as well as cranking and pumping viscosities in mPa∙s (cP) at SAE J300 specification temperatures.
CANNON Certified Viscosity Check Oils are available in 1 L (quart) and 3.8 L (gallon) sizes.
Refer to Table 15 for catalog numbers and specifications.
Table 15 • Nominal Viscosity Values of CANNON Viscosity Check Oils (CVCO)
Catalog Number ASTM Test Method Temp. (°C) Typical Viscosity CVCO-5W30 9727-S00.032 (1 L) 9727-S00.128 (3.8 L) D445 40 58 cSt D445 100 11 cSt D5293 -25 3,000 mPa•s D5293 -30 5,800 mPa•s D4684 -35 20,000 mPa•s D4052 15 0.85 g/mL
|
CVCO-10W30 9727-S01.032 (1 L) 9727-S01.128 (3.8 L) |
D445 |
40 |
70 cSt |
|
D445 |
100 |
11 cSt | |
|
D5293 |
-20 |
2,800 mPa•s | |
|
D5293 |
-25 |
5,700 mPa•s | |
|
D4684 |
-30 |
21,000 mPa•s | |
|
D4052 |
15 |
0.88 g/mL |
|
CVCO-15W40 9727-S02.032 1 L) 9727-S02.128 (3.8 L) |
D445 |
40 |
100 cSt |
|
D445 |
100 |
14 cSt | |
|
D5293 |
-15 |
3,500 mPa•s | |
|
D5293 |
-20 |
6,500 mPa•s | |
|
D4684 |
-25 |
25,000 mPa•s | |
|
D4052 |
15 |
0.88 g/mL |